| FC10/FC10Plus:
What
batteries should I use in my FC10/FC10Plus?
How
often should I calibrate my FC10/FC10Plus?
How
often should I perform a calibration check on my FC10/FC10Plus?
What
is the recommended service interval of my FC10/FC10Plus?
Are
there additional training materials for my FC10/FC10Plus?
What
do I do if my FC10/FC10Plus constantly reboots?
What
batteries should I use in my FC10/FC10Plus?
High quality alkaline AA batteries such as Energizer® or Duracell®
brand are recommended.
<top of page>
How
often should I calibrate my FC10/FC10Plus?
Lifeloc recommends you calibrate your FC once a year or if it fails
2 consecutive calibration checks. In addition, check with your program
administrator for any additional requirements or guidelines your
organization may have.
<top of page>
How
often should I perform a calibration
check on my FC10/FC10Plus?
Calibration check requirements vary depending upon the program guidelines
or internal procedures you are testing under.
In a non-DOT program your requirements
may vary. Please check with your program administrator.
<top of page>
What
is the recommended service interval of my FC10/FC10Plus?
We recommend you send your FC10/FC10Plus in for a Factory Diagnostic
Check every 2 years.
<top of page>
Are
there additional training materials for my FC10/FC10Plus?
We can provide CD training courses that cover operation of the FC10
and FC10Plus. Contact our sales department for further information
or you can purchase them on the web by clicking
here.
<top of page>
What
do I do if my FC10/FC10Plus constantly reboots?
This is typically caused by a battery failure. Replacement of all
4 batteries should fix the problem.
<top of page>
|
